Nvidia ConnectX-6 Manual page 6

About This Manual
This User Manual describes NVIDIA® ConnectX®-6 InfiniBand/Ethernet adapter cards for Open Compute Project (OCP), Spec 3.0. It provides details as to
the interfaces of the board, specifications, required software and firmware for operating the board, and relevant documentation.
Ordering Part Numbers
The table below provides the ordering part numbers (OPN) for the available ConnectX-6 InfiniBand/Ethernet adapter cards for OCP Spec 3.0.
NVIDIA SKU
900-9X657-0018-MI0
900-9X657-0058-SI2
900-9X657-0058-SB0
EOL'ed (End of Life) Ordering Part Number
NVIDIA SKU
900-9X657-0018-SI0
900-9X657-0016-SI0
900-9X657-0018-SE0
Intended Audience
This manual is intended for the installer and user of these cards. The manual assumes basic familiarity with InfiniBand/Ethernet network and architecture
specifications.
Legacy OPN
MCX653435M-HDAI
MCX653436A-HDAI
MCX653436A-HDAB
Legacy OPN
MCX653435A-HDAI
MCX653435A-EDAI
MCX653435A-HDAE
Marketing Description
ConnectX®-6 InfiniBand/Ethernet adapter card, 200Gb/s (HDR IB and
200GbE) for OCP 3.0, with host management, Single-port QSFP56,
PCIe4.0 x16, Internal Lock
ConnectX®-6 InfiniBand/Ethernet adapter card, 200Gb/s (HDR IB and
200GbE) for OCP 3.0, with host management, Dual-port QSFP56,
PCIe4.0 x16, Internal Lock
ConnectX®-6 InfiniBand/Ethernet adapter card, 200Gb/s (HDR IB and
200GbE) for OCP 3.0, with host management, Dual-port
QSFP56, PCIe4.0 x16, Thumbscrew Bracket
ConnectX®-6 InfiniBand/Ethernet adapter card, 200Gb/s (HDR IB and 200GbE) for OCP 3.0,
with host management, Single-port QSFP56, PCIe4.0 x16, Internal Lock
ConnectX®-6 InfiniBand/Ethernet adapter card, 100Gb/s (HDR100, EDR IB and 100GbE) for
OCP 3.0, with host management, Single-port QSFP56, PCIe 3.0/4.0 x16, Internal Lock
ConnectX®-6 InfiniBand/Ethernet adapter card, 200Gb/s (HDR IB and 200GbE) for OCP 3.0,
with host management, Single-port QSFP56, PCIe4.0 x16, Ejector Latch
Lifecycle
Mass Production
Mass Production
Mass Production
Marketing Description
6