Nvidia ConnectX-6 Manual page 51

Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW XX.XX.XXXX
Status: No matching image found
Error message #2:
The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor.
d. Case A: If the installation script has performed a firmware update on your network adapter, you need to either restart the driver or reboot
your system before the firmware update can take effect. Refer to the table below to find the appropriate action for your specific card.
Action \ Adapter
Standard ConnectX-4/ConnectX-4 Lx or
higher
Adapters with Multi-Host Support
Socket Direct Cards
Case B: If the installations script has not performed a firmware upgrade on your network adapter, restart the driver by running: "/etc/init.d/
openibd restart".
e. (InfiniBand only) Run the hca_self_test.ofed utility to verify whether or not the InfiniBand link is up. The utility also checks for and displays
additional information such as:
• HCA firmware version
• Kernel architecture
• Driver version
• Number of active HCA ports along with their states
• Node GUID
For more details on hca_self_test.ofed, see the file docs/readme_and_user_manual/hca_self_test.readme.
After installation completion, information about the OFED installation, such as prefix, kernel version, and installation parameters can be retrieved
by running the command /etc/infiniband/info. Most of the OFED components can be configured or reconfigured after the installation, by modifying
Driver Restart
- +
- -
- -
Standard Reboot (Soft Reset) Cold Reboot (Hard Reset)
-
+
+
51