Supermicro 440LX Reference Manual page 43

BIOS User's Manual
Check
Point Description
9A Set the timer and printer base addresses.
RS-232 base address next.
9B Returned after setting the RS-232 base address.
Performing
Coprocessor test next.
9C Required initialization before the Coprocessor test is
over. Initializing the Coprocessor next.
9D Coprocessor initialized.
initialization after the Coprocessor test next.
9E Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
Num Lock key next.
next.
A2 Displaying any soft errors next.
A3 The soft error display has completed.
keyboard typematic rate next.
A4 The keyboard typematic rate is set.
memory wait states next.
A5 Memory wait state programming is over.
screen and enabling parity and the NMI next.
A7 NMI and parity enabled.
required before passing control to the adaptor ROM at
E000 next.
A8 Initialization before passing control to the adaptor ROM
at E000h completed.
ROM at E000h next.
A9 Returned
Next, performing
the E000 option ROM had control.
any required initialization
Performing any required
Issuing the keyboard ID command
Performing any initialization
Passing control to the adaptor
from adaptor ROM
any initialization
B-8
Setting the
before the
Setting the
Programming the
Clearing the
at E000h control.
required after