Table of Contents
Advertisement
Appendix B: AMI BIOS POST Diagnostics Error Messages
Check
Point
Description
88
Returned from WINBIOS Setup and cleared the screen.
Performing any necessary programming after WINBIOS
Setup next.
89
The programming after WINBIOS Setup has been
completed. Displaying the power-on screen message
next.
8B
The first screen message has been displayed.
<WAIT...> message is displayed.
mouse check and extended BIOS data area allocation
check next.
8C
Programming the WINBIOS Setup options next.
8D
The
WINBIOS
Resetting the hard disk controller next.
8F
The hard disk controller has been reset.
floppy drive controller next.
91
The floppy drive controller has been configured.
Configuring the hard disk drive controller next.
95
Initializing the bus option ROMs from C800 next.
96
Initializing before passing control to the adaptor ROM at
C800.
97
Initialization before the C800 adaptor ROM gains
control has been completed.
is next.
98
The adaptor ROM had control and has now returned
control to BIOS POST.
processing after the option ROM returned control.
99
Any initialization required after the option ROM test has
been completed.
printer base address next.
Performing the PS/2
Setup
options
are
The adaptor ROM check
Performing any required
Configuring the timer data area and
B-7
The
programmed.
Configuring the
Advertisement
Table of Contents
