Supermicro 440LX Reference Manual page 38

Appendix B: AMI BIOS POST Diagnostics Error Messages
Check
Point Description
2A Bus initialization system, static, output devices will be
done next, if present.
2B Passing control to the video ROM to perform any
required configuration before the video ROM test.
2C All necessary processing before passing control to the
video ROM is done.
and passing control to it.
2D The video ROM has returned control to BIOS POST.
Performing any required processing after the video
ROM had control.
2E Completed post-video ROM test processing.
EGA/VGA controller is not found, performing the
display memory read/write test next.
2F The EGA/VGA controller was not found.
memory read/write test is about to begin.
30 The display memory read/write test passed.
retrace checking next.
31 The display memory read/write test or retrace checking
failed. Performing the alternate display memory
read/write test next.
32 The alternate display memory read/write test passed.
Looking for alternate display retrace checking next.
34 Video display checking is over.
mode next.
37 The display mode is set.
message next.
38 Initializing the bus input, IPL, and general devices next, if
present.
39 Displaying bus initialization error messages.
Looking for the video ROM next
Setting the display
Displaying the power on
B-3
If the
The display
Look for