Supermicro 440LX Reference Manual page 25

BIOS User's Manual
ters of both devices to be identical. This option must be set to
Enabled if any ISA adapter card installed in the system requires
VGA palette snooping.
PCI IDE Busmaster
The settings are: Disabled or Enabled.
Offboard PCI IDE Card
This option specifies if an offboard PCI IDE controller adapter
card is installed in the computer. The PCI expansion slot on the
motherboard where the offboard PCI IDE controller is installed
must be specified. If an offboard PCI IDE controller is used, the
onboard IDE controller is automatically disabled. The settings are
Auto (AMIBIOS automatically determines where the offboard PCI
IDE controller adapter card is installed), Slot 1, Slot 2, Slot 3, Slot
4, Slot 5 or Slot 6.
This option forces IRQ14 and IRQ15 to a PCI slot on the PCI local
bus. This is necessary to support non-compliant ISA IDE control-
ler adapter cards. If an offboard PCI IDE controller adapter card
is installed in the computer, you must also set the Offboard PCI
IDE Primary IRQ and Offboard PCI IDE Secondary IRQ options.
Offboard PCI IDE Primary IRQ
Offboard PCI IDE Secondary IRQ
These options specify the PCI interrupt used by the primary (or
secondary) IDE channel on the offboard PCI IDE controller. The
settings are Disabled, Hardwired, INTA, INTB, INTC, or INTD.
PCI Slot1 IRQ Priority
PCI Slot2 IRQ Priority
PCI Slot3 IRQ Priority
PCI Slot4 IRQ Priority
These options specify the IRQ priority for PCI devices installed in
the PCI expansion slots. The settings are Auto, (IRQ) 3, 4, 5, 7,
8, 10, and 11, in priority order.
2-16