5-12 Parallel, Floppy, Ide, And Sata Ports - Supero SuperWorkstation 7045A-C3 User Manual

S W
uper orkstation 7045A-C3/7045A-CT User's Manual

5-12 Parallel, Floppy, IDE, and SATA Ports

Use the following information to connect the IDE hard disk drive cables.
•
A red mark on a wire typically designates the location of pin 1.
•
The 80-wire ATA100/66 IDE hard disk drive cable that came with your system
has two connectors to support two drives. This special cable should be used
to take advantage of the speed this new technology offers. The blue connector
connects to the onboard IDE connector interface and the other connector(s) to
your hard drive(s). Consult the documentation that came with your disk drive for
details on actual jumper locations and settings for the hard disk drive.
Parallel (Printer) Port
The parallel (printer) port is located
above the COM ports. See the table
on the right for pin defi nitions.
Parallel (Printer) Port
Pin Defi nitions
Pin# Defi nition
1 Strobe-
3 Data Bit 0
5 Data Bit 1
7 Data Bit 2
9 Data Bit 3
11 Data Bit 4
13 Data Bit 5
15 Data Bit 6
17 Data Bit 7
19 ACK
21 BUSY
23 PE
25 SLCT
5-24
Pin # Defi nition
2 Auto Feed-
4 Error-
6 Init-
8 SLCT IN-
10 GND
12 GND
14 GND
16 GND
18 GND
20 GND
22 Write Data
24 Write Gate
26 NC