Table of Contents
Advertisement
A+ SERVER 4042G-6RF/TRF User's Manual
•
The power supply power cords must include a grounding plug and must be
plugged into grounded electrical outlets.
•
This product may be connected to an IT power system. In all cases, make sure
that the unit is also reliably connected to Earth (ground).
•
Serverboard Battery:
battery is installed upside down, which will reverse its polarites (see Figure
4-1). This battery must be replaced only with the same or an equivalent type
recommended by the manufacturer (part # CR2032). Dispose of used batteries
according to the manufacturer's instructions.
•
DVD-ROM Laser:
DVD-ROM drive. To prevent direct exposure to the laser beam and hazardous
radiation exposure, do not open the enclosure or use the unit in any uncon-
ventional way.
•
Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive Tempera-
ture Coeffi cient) fuses on the mainboard must be replaced by trained service
technicians only. The new fuse must be the same or equivalent as the one
replaced. Contact technical support for details and support.
4-2
General Safety Precautions
!
Follow these rules to ensure general safety:
•
Keep the area around the 4042G-6RF/TRF clean and free of clutter.
•
The 4042G-6RF/TRF weighs approximately 65.5 lbs (29.8 kg) when fully loaded.
When lifting the system, two people at either end should lift slowly with their
feet spread out to distribute the weight. Always keep your back straight and lift
with your legs.
•
Place the chassis top cover and any system components that have been re-
moved away from the system or on a table so that they won't accidentally be
stepped on.
CAUTION - There is a danger of explosion if the onboard
CAUTION - this server may have come equipped with a
4-2
Advertisement
Table of Contents
