Table of Contents
Advertisement
4.5
Recycling the machine
Make the old machine unusable.
1. Unplug the machine.
2. Cut the power cord.
3. Do not discard of electrical appliances with
household waste.
As specified in European Directive 2012/19/EU
on old electrical and electronic appliances,
used electrical goods must be collected sepa-
rately and recycled ecologically.
5
Maintenance
5.1
Regular servicing and inspection
Regular servicing and inspection of your machine
must be carried out by suitably qualified personnel in
accordance with relevant legislation and regulations.
In particular, electrical tests for earth continuity, in-
sulation resistance, and condition of the flexible cord
should be checked frequently.
In the event of any defect, the machine MUST be
withdrawn from service, completely checked and
repaired by an authorized service technician.
At least once a year, a Nilfisk technician or an in-
structed person must perform a technical inspection
including filters, air tightness and control mecha-
nisms. Appliances in Dust Class H must have their
filtration efficiency checked once a year. The result
must be presented upon request. If the effiency of
the filter does not fulfil the requirements for Dust
Class H, the filter must be replaced.
5.2
Maintenance
Remove the plug from the socket before performing
maintenance. Before using the machine make sure
that the frequency and voltage shown on the rating
plate correspond with the mains voltage.
The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
clean with a dry cloth, and a small amount of spray
polish.
During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
•
Use filtered compulsory ventilation
•
Wear protective clothing
•
Clean the maintenance area so that no harmful
substances get into the surroundings.
CAUTION
In the case of asbestos abatement wear additional
single-use clothing. Wear a P2 breathing mask.
Before removing the machine from the area contami-
nated with harmful substances:
Clean the outside of the machine, wipe it clean or
OEL=Occupational Exposure Limit,
1)
Original instruction
pack the machine in well sealed packaging and
avoid spreading deposited harmful dust.
After use, in asbestos contaminated areas, the ma-
chine must be cleaned by an authorised person ac-
cording to TRGS 519.
During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
•
Packed in well sealed bags
•
Disposed of in a manner that complies with valid
regulations for such waste removal.
For details of after sales service contact your
dealer or Nilfisk service representative responsible
for your country. See reverse of this document.
Optional accessories / Option depending on model
*)
9
Advertisement
Table of Contents
