Snmp; Figure 7-13 Web Configurator - Ip Config - ZyXEL Communications ZyXEL EES-1024AF User Manual

EES-1024AF Intelligent Ethernet Switch

Figure 7-13 Web Configurator - IP Config

7.14 SNMP

You can manage the switch using a third-party SNMP ( Simple Network Management Protocol ) agent. The
community strings control the access rights to the SNMP agent.
Type the system name, system location and system contact in the corresponding fields. See the section on Home for
descriptions of these fields.
You can submit community strings on Get Request Community, and Set Request Community to authorize
management access. For security you should change them to prevent unauthorized access.
Get Request Community ( Read-only access right ) means that member of community can view the information
but can not make changes to the configuration.
Set Request Community ( Read/Write access right ) allow the member of the community to view and make
change to the configuration.
To set the Get Request Community and Set Request Community names, type the desired text string in the
corresponding fields. The default value for both fields is public. You must set these two parameters correctly to
perform Get request from the management unit and Set request to the management unit.
Advanced Web Management 7-15