Table of Contents
Advertisement
4.3 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface you use to manage your switch through the Console port
or Telnet. Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the following table.
OPERATION
Move down to
[ENTER]
another menu
Move up to a
Type q or Q, then
previous menu
press [ENTER]
Entering information [ENTER]
Save your
[ENTER]
configuration
Exit the SMT
Type q or Q, then
press [ENTER]
4.3.1
The Main Menu
After you log in, the SMT displays the Main Menu.
#
MENU TITLE
1
Device Settings
2
Port Settings
3
Address Table
Introducing the SMT
EES-1024AF Intelligent Ethernet Switch Optional Modules Guide
Table 4-2 Navigating the SMT
KEYSTROKE
To move forward to a submenu, type in the number or alphabet of the
desired submenu and press [ENTER].
To move back to the previous menu, type q or Q and press [ENTER].
Type in the number or alphabet of the desired field, type in the
appropriate information and press [ENTER].
Save your configuration by pressing [ENTER] at the message "Press
ENTER to confirm or ESC to cancel". Saving the data on the screen
will take you, in most cases to the previous menu.
Type q or Q at the main menu prompt and press [ENTER] to exit the
SMT interface.
[Main]
1. Device Settings
2. Ports Settings
3. Address Table
4. Spanning Tree Protocol
5. Broadcast Storm Filter
6. IGMP
V. VLAN Mode (2 modes)
C. VLAN for CPU (2 VLANs)
I. Secure IP for Telnet and HTTP
S. Save Current Settings
D. Factory Default Settings & Reboot System
R. Reboot System
Q. Quit
Select one function (1-6, V, C, I, S, D, R, Q):
Figure 4-5 SMT- Main Menu
Table 4-3 SMT Main Menu Summary
Use this menu to enter administrative information.
Use this menu to set the port settings for each port.
Use this menu to display address information of each port.
DESCRIPTION
DESCRIPTION
4-3
Advertisement
Table of Contents
Troubleshooting
