This chapter describes the OSPF (Open Shortest Path First) routing protocol and shows you
how to configure OSPF on the ES-4024A.
28.1 Overview
OSPF (Open Shortest Path First) is a link-state protocol designed to distribute routing
information within an autonomous system (AS). An autonomous system is a collection of
networks using a common routing protocol to exchange routing information.
OSPF offers some advantages over traditional vector-space routing protocols (such as RIP).
The following table summarizes some of the major differences between OSPF and RIP.
Table 61 OSPF vs. RIP
Network Size
Metrics
Convergence
28.1.1 OSPF Autonomous Systems and Areas
An OSPF autonomous system can be divided into logical areas. Each area represents a group
of adjacent networks. All areas are connected to a backbone (also known as area 0). The
backbone is the transit area to route packets between two areas. A stub area, at the edge of an
AS, is not a transit area since there is only one connection to the stub area.
The following table describes the four classes of OSPF routers.
Table 62 OSPF: Router Types
TYPE
Internal Router (IR)
Area Border Router (ABR) An Area Border Router connects two or more areas.
Backbone Router (BR)
AS Boundary Router
Chapter 28 OSPF
OSPF
Large
Bandwidth, hop count, throughput, round
trip time and reliability.
Fast
DESCRIPTION
An Internal or intra-area router is a router in an area.
A backbone router has an interface to the backbone.
An AS boundary router exchanges routing information with routers in other
ASes.
C
H A P T E R
RIP
Small (with up to 15 routers)
Hop count
Slow
ES-4024A User's Guide
2 8
OSPF
167