Default Dvmrp Timer Values; Figure 98 Dvmrp: Duplicate Vid Error Message; Table 60 Dvmrp: Default Timer Values - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide

Figure 98 DVMRP: Duplicate VID Error Message

27.4 Default DVMRP Timer Values

The following are some default DVMRP timer values. These may be changed using line
commands. Please see the commands chapter later in this User's Guide.

Table 60 DVMRP: Default Timer Values

DVMRP FIELD
Probe interval
Report interval
Route expiration time
Prune lifetime
Prune retransmission time
Graft retransmission time
166
DEFAULT VALUE
10 sec
35 sec
140 sec
Variable (less than two hours)
3 sec with exponential back off
5 sec with exponential back off
Chapter 27 DVMRP