Table of Contents
Advertisement
13. While a second person holds the Console (3)
near the Upright (2), connect the four wires on
the Console to the Upper Wire (81), the two
Heart Rate Wires (92, 77), and the Extension
Wire (102). Insert the excess wire into the
Upright.
Tip: Avoid pinching the wires. Attach the
Console (3) to the Upright (2) with four M4 x
16mm Screws (67).
14. Plug the Power Adapter (84) into the receptacle
on the front of the elliptical.
Note: To plug the Power Adapter into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 16.
15. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
13
3
14
84
14
Avoid pinching
the wires
92
81
102
2
77
67
Advertisement
Table of Contents
