Aux Port Handling Procedure - Kubota KX057-4 U55-4 Operator's Manual

46 EXCAVATOR OPERATION
C Checking the settings of each action mode
When an action mode is selected and the " " mark
appears at the lower right of the icon, the flow volume
setting gets displayed by pressing the switch 4.
(1) Icon
(2) Information mark
(3) Information switch (Switch 4)
[Display in AUX 1 and 2 modes]
(1) Port 1
(2) Port 2
(3) Port 3
(4) Port 4
BAUX Port Handling Procedure
1. Turn the starter key to the "RUN" position.
Let the engine warm up after start-up for approx. 10
minutes under no load conditions.
(1) Starter switch
2. Lower the pilot control lock lever (UNLOCK).
(1) Pilot control lever
(A) "STOP"
(B) "RUN"
(C) "START"
(A) "Unlock"
(B) "Locked"