Table of Contents
Advertisement
110 LIST OF SCREENS
Message
No.
Not equipped with
overload warning
function
7
Out of fuel
8
Fuel sensor error
9
Charging system error
10
Engine oil pressure
error
11
Overvoltage
12
Overheat advance
warning
Water temperature
rising
13
Problem or failure
(What happened)
This message appears if the
overload warning switch is
pressed on machines not
equipped with overload
warning system.
Fuel is running out.
The fuel sensor system is in
trouble.
Charging system is in
trouble.
Charging is failure.
The engine lubricating
system oil pressure is too
low. Stop the engine.
This message appears if a
jumper cable is connected to
a 24V battery or improper
device to get the engine
started or if the alternator is
in trouble.
Water temperature is rising
somewhat higher than
specified.
Machine behavior
(Provisional measure)
-
-
The fuel level indicator does
not appear on the
meter.Press the display
selector switch, and the
normal display is switched
back.The machine's other
functions are still operative.
The machine works until the
battery gets dead.
The engine may get burnt
out. Immediately stop the
engine.
Immediately interrupt the
engine if with a 24V battery.
When the engine gets
restarted and is running with
no message appearing, it
means there is no problem.
Operate with the load a little
lessened.
Check the radiator and other
components for clog.
Immediately clean them up.
Correction
-
Add fuel.
Immediately contact your
local dealer.
Immediately contact your
local dealer.
Immediately contact your
local dealer.
If this message still appears,
immediately ask for repair.
-
Advertisement
Table of Contents
