Table of Contents
Advertisement
4
SAFE OPERATION
3.
AFTER OPERATION
Before leaving the machine,
A Park the excavator on a firm, flat and level surface. If
this is not possible, park across the slope.
A Lower the attachments and the dozer blade to the
ground.
A Stop the engine.
A Release pressure in the hydraulic system.
A Lock all control levers.
A Remove the key.
A Lock the cab door (if equipped)
(1) Pilot control lock lever
(A) "Unlock"
(B) "Locked"
4.
SAFE LOADING AND TRANSPORT OF
THE EXCAVATOR
1. Observe all regulations concerning the transport of
excavators on public roads.
2. Use adequately long and robust ramps when loading
on the machine. (for details see "TRANSPORTING
THE EXCAVATOR ON A VEHICLE")
3. Do not change the running direction and to avoid
tipping over, do not try to swing the attachment
crosswise to the loading ramps.
4. Lower the attachment on the loading bed and release
the pressure from the hydraulic system.
After loading the excavator on the truck, block the
tracks with blocks and tie down the excavator at the
appropriate locations.
(1) Chain
(2) Block
5. Avoid abrupt braking of the vehicle with the excavator
loaded. Sudden braking cause the excavator to move
and may cause a serious accident.
6. When towing the excavator or pulling a load, the load
must be less than the strength of the towing line
attached to excavator. Not to be used for tie down or
lifting of the machine.
(1) Tow line
Advertisement
Table of Contents
