LYNX Touch Installation and Setup Guide
System Features
Communication
ADEMCO Contact ID
•
SIA (DC-03)
•
Internet Central Station communication
•
GSM cellular Central Station communication
•
WiFi Central station communication
•
Two-way voice communication
•
Supports AlarmNet remote services
•
System Power
Primary Power: Plug-in Power Supply, 110VAC to 9VDC, 2.7A output P/N 300-
•
04705V1 or 300-04065V1 (300-04063V1 or 300-04064V1 in Canada)
Backup battery: Rechargeable nickel-metal hydride battery pack rated at 7.2Vdc.
•
(P/N 300-03864-1/LYNXRCHKIT-SC or 300-03866/LYNXRCHKIT-SHA)
Alarm Output
Built-in sounder
•
Steady output for burglary/panic
•
Temporal (3) pulse output for fire alarms
•
Temporal (4) pulse output for carbon monoxide alarms
•
Long Range Radio (GSM)/Audio Alarm Verification
•
Trigger output
•
Programming
Options stored in EEROM
•
Can be uploaded, downloaded or controlled via IBM-compatible computer using
•
Compass downloader software and specified HAYES or Honeywell CIA modem or
via capable GSM, IP or WiFi communications module
* L7000 requires GSM, IP or WiFi communications
Flash downloading
•
Other Features
Exit error feature (detects difference between an actual alarm and exit alarm caused
•
by leaving a door open after the exit delay expires)
Event log storage (total events)
•
RF jam detection
•
Installer programmable user (Follow Me) phone numbers
•
Advanced Protection Logic™ (APL) (Minimizes the likelihood of the system being
•
disabled before notification can be sent to the Central Station indicating that the
premise has been compromised.)
Displays web content including Local News, Weather and Traffic (requires Total
•
Connect Service)
Dealer/Central Station messages (requires Total Connect Service)
•
- 6 -
L5210
L7000
*
128
256
2
n/a