Troubleshooting - Summit SPRF26M Use And Care Manual

Troubleshooting

Before calling for assistance or service, please check this Trouble-
shooting section. It may save you the cost of a service call. If you
still need help, follow the instructions below.
If you don't find the answer to your question in this manual, try our
website, www.summitappliance.com, under Service and Sup-
port, or contact our Customer Service department toll-free in the
U.S.A. at 1-800-287-8799, Monday through Friday, 9:00 a.m. –
5:00 p.m. (ET).
If you need replacement parts, we recommend that you only use
factory-specified parts. Factory-specified parts will fit right and
work right, because they are made with the same precision used
to build every new SUMMIT
line at www.summitapplianceparts.com.
Problem Cause
Loose contact be-
tween plug and unit
socket.
Cooling func-
Power voltage is out
tion does not
of range.
work.
The temperature
sensor is mal-
functioning.
A fan motor does not
work.
Cooling Unit is exposed to
efficiency direct sunlight.
is bad.
Ventilator or fan pro-
peller is blocked.
There is a
strange noise
Unit is mal-
or vibration
functioning.
during opera-
tion.
There is a
burning smell or Unit is mal-
the case is functioning.
deformed.
SUMMIT APPLIANCE
appliance. Parts can be ordered on-
®
Solution
Plug firmly into unit socket and
cigarette lighter.
Check whether unit is plugged
into power supply of 12V or
24V; be sure battery charge is
not too low or too high.
Contact a local repair center to
replace temperature sensor.
Contact a local repair center to
replace fan motor.
Place unit in a cool, shady place
with good airflow.
Clean ventilator and fan propel-
ler; make sure unit has good
ventilation.
To prevent breakdown, turn the
unit off immediately and unplug
it from power source. Contact a
local repair center.
To prevent breakdown, turn the
unit off immediately and unplug
it from power source. Contact a
local repair center.
Page 9