Canon Arizona 135 GT Operation Manual page 41

Component
10) Vacuum Zone Control
Handles (image 2)
11) Automatic Maintenance
Station
12) Ink Filters
(13) Coolant Bottle
(14) Vacuum Table Foot
Switch
(15) Ink Bay
(16) Static Suppression Bar
(optional)
[18] Ink Bays and Vacuum Zone Control Handles
Function
Five vacuum zone control handles determine if vacuum zones 2 to
6 on the printer table are active when the vacuum pump is switch-
ed on. Zone 1 is always on so it has no control handle.
Provides a station where printheads can be parked on a vacuum
system that pulls debris and particulate matter from the nozzles.
Remove unwanted particulate matter from the ink. Ink filters are
located behind a door under the ink bags.
Provides coolant to maintain correct temperature of the ink in the
printheads.
Toggles the pump that turns the table vacuum on/off. Vacuum
must be on prior to starting a print.
There are two ink bays: the Primary bay contains CMYK ink and
the coolant bottle; the Secondary bay holds any additional suppor-
ted colour channels.
Reduces static charge on the media. Results in less ink misting on
the printed image.
Operator Interface Hardware
Chapter 3 - Navigate the User Interface 41