Media Edge Protectors
7. Press down on the tape to fasten the protector in this position.
[45] Edge Protector in Position
1. Height adjuster
2. Media edge
3. Cut guide
NOTE
The adhesive on the edge protector can be re-used approximately ten times. If you find
that it is not holding the protector in place, then use a new one.
Result
The media edge protectors will reduce the amount of fibre and other debris. However, it is
important to keep the platen and cutting guide areas clean as indicated in the Roll Media
maintenance section.
How to Deal with Wide Media
If you use media of the maximum width for the RMO (2.2m or 7.2 feet) that requires media edge
protection, you can cut the protectors in half in order for them to fit.
112
Chapter 5 - Roll Media Option