Remove Stains - Canon Arizona 135 GT Operation Manual

How to Remove Solid Debris
Procedure
1. Dust the surface of the capstan using a Swiffer or other lint-free brush or cloth. Surface may be
brushed in any direction.
[94] Remove lint, dust, paper particles and debris

Remove Stains

Supplies Needed: Rubber gloves, soap, hot water, and lint-free cloth.
Procedure
1. Put on nitrile gloves
2. Mix a cleaning solution that is 50:1 hot water to soap.
NOTE
Use a mild detergent such as Ivory - avoid soaps that have dies, moisturising oils, or
perfumes as they may damage the capstan. Read the label! Our R&D Lab has tested
only Ivory Detergent. If you are uncertain about a detergent try it out in a 50:1 solution
on a small area at the end of the capstan.
3. Wet the cloth in the cleaning solution and wring out excess liquid. Scrub the surface of the
capstan using the cleaning cloth.
Remove Stains
Chapter 9 - Maintenance 201