Advertisement

Quick Links

CA-A307E
Lifting pole
7C02126400A2
Preface
Thank you for purchasing our lifting pole.
This instruction manual describes precautions and how to safely use and operate the lifting pole.
●To ensure safe and proper use of the lifting pole, be sure to read this instruction manual
and the instruction manual for the suitable bed before use.
●The safe and correct operating procedures should be explained not only to the person using the bed
with lifting pole for medical treatment but also to the user's caregiver.
●After reading this instruction manual, store it in a place that can be easily accessed for later reference.
Users and/or patients are requested to report information about any serious incident that occurs within the EU
to the regulating authority of the member country of residence.
Serious incident means any incident that directly or indirectly resulted in, may have resulted in,
or may result in any of the following.
・Death of a patient, user, or other person
・Serious temporary or permanent adverse effects on the health of a patient, user, or other person
・Serious public health threat
●Some of the descriptions in this instruction manual may differ from the product you have purchased
due to model improvements.
●Values described for the operation range, dimensions, angles, and weights are subject
to normal manufacturing tolerances.
Except for special cases, words such as approximately and about are omitted in this instruction manual
to improve readability.
●For any queries, contact Paramount Bed (see p. 4) or your distributor.
Intended use
■This lifting pole is designed to be attached to the bed for support to raise the body from the bed
by attaching to the bed or for training too.
■ Intended users : Medical professionals, patients
■ Patient target group : Refer to the instruction manual of the medical device to be used together
with this product.
Lifting pole

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CA-A307E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PARAMOUNT BED CA-A307E

  • Page 1 Except for special cases, words such as approximately and about are omitted in this instruction manual to improve readability. ●For any queries, contact Paramount Bed (see p. 4) or your distributor. Intended use ■This lifting pole is designed to be attached to the bed for support to raise the body from the bed by attaching to the bed or for training too.
  • Page 2 Specifications < Specifications > Subject to normal manufacturing tolerance Product name Lifting pole Model No. CA-A307E External dimensions (mm) 1205 x 866 x 130 (when assembled) Product weight (kg) Materials Made of steel, powder coating (part is resin mold item)
  • Page 3 Attaching the lifting pole ●Load capacity is 76kg. Do not hang an article exceeding the load capacity because it may damage the lifting pole, resulting in an injury. ■The lifting pole can be used for support to raise the body from the bed by attaching to the bed. It can be used for training too.
  • Page 4 ■ Keep the instruction manual insert in a safe place so that they do not become lost. < Disposal > ■ Dispose of the product in accordance with local laws and regulations. Contact Paramount Bed or your distributor (see "Contact information" as shown below) for any quaries.
  • Page 5 After-sales service 1.When requesting repairs Contact Paramount Bed or your distributor (see "Contact information" as shown below) for repair.  Details necessary when requesting repair ・Product name, model number, safety label number ・Date of purchase ・Details of fault or problem (please provide as much detail as possible) ・Your name, organization, address, and phone number...
  • Page 6 NOTES...
  • Page 7 NOTES...
  • Page 8 2023-03...
  • Page 9 Except for special cases, words such as approximately and about are omitted in this instruction manual to improve readability.  For any queries, contact Paramount Bed (see "Contact Information" as shown below) or your distributor.  Users and/or patients are requested to report information about any serious incident that occurs within the EU to the regulating authority of the member country of residence.
  • Page 10 Refer to the instruction manual for the medical device to be used together with this product. UNPACKING THE PRODUCT AND CHECKING THE PARTS  After unpacking, check that there are no missing or damaged parts. If any parts are missing or damaged, contact Paramount Bed (see "Contact Information" on p. 6).
  • Page 11: Safety Precautions

     Stop use in case of a failure, damage, or deformation.  In case of a failure, damage, or deformation, immediately stop use and contact Paramount Bed (see "Contact Information" on p. 6) or your distributor for repair or replacement. You may accidentally injure yourself.
  • Page 12: Product Symbol Definitions

    SAFETY PRECAUTIONS Indicates actions that may result in minor injury (bruises, scratches, CAUTION cuts or property damage) if the indication is ignored.  Do not move the bed while holding the IV pole.  Excessive force may be applied to the IV pole and it may be damaged or deformed. ...
  • Page 13: Operation

    OPERATION Open the hooks at the top. Loosen the vertical stopper, draw out the sliding pipe, adjust the hooks to the suitable height, and then firmly tighten the vertical stopper. To use the IV pole, completely insert the IV pole in the IV pole attachment hole on the bed and check that the supportive bar does not rotate.
  • Page 14 DAILY MAINTENANCE, LONG-TERM STORAGE, AND DISPOSAL <Daily maintenance>  When removing stains from parts Perform steps 1 to 5 below. 1. Wipe off stains with a cloth soaked in a neutral detergent diluted with water and wrung out well. 2. Wipe off any residual detergent with a cloth soaked in water and wrung out well. 3.
  • Page 15: After Sales Service

     Your name, organization, address, and phone number 2. Minimum stock availability period Paramount Bed keeps replacement parts (necessary to maintain product performance) in stock for at least eight years after the discontinuation of production. 3. When you are not sure about the after-sales service For any queries, please feel free to contact your distributor or to the following address.
  • Page 16 Instruction manual edited by: Torindo Co., Ltd. 2023-03...
  • Page 17  Description of the operation range, dimensions, angles, and weights are subject to normal manufacturing tolerances. Except for special cases, words such as approximately and about are omitted in this instruction manual to improve readability.  For any queries, contact Paramount Bed (see P.8) or your distributor. PARAMOUNT BED CO., LTD.
  • Page 18 INTENDED USE, PART NAMES AND CHEKING PARTS Intended use This oxygen cylinder holder is made for attaching to a medical device to be used together with this product designated by Paramount Bed to use the oxygen cylinder. [Intended users] Medical professionals [Patient target group] Refer to the instruction manual for the medical device to be used together with this product.
  • Page 19 Stop use in case of a failure, damage, or deformation.  In case of a failure, damage, or deformation, immediately stop use and contact Paramount Bed (see P.8) or your distributor for repair or replacement. You may accidentally injure yourself.
  • Page 20: Using The Product

    USING THE PRODUCT SING THE PR ODUCT ● Attach the oxygen cylinder holder to any of the accessory attachment holes on the two corners of head end of the medical device. If you attach the oxygen cylinder holder to a hole other than the accessory attachment hole, the oxygen cylinder holder may detach and fall on your foot during medical device operation, resulting in injury, or the oxygen cylinder holder or the medical device may be damaged or deformed.
  • Page 21 Insert the oxygen cylinder holder into any of the optional accessory attachment holes on the two corners of head end of the medical device. Do not attach the oxygen cylinder holder to the foot end of medical device. When the medical device is operated with reverse trendelenburg, there is a risk that the foot may...
  • Page 22 USING THE PRODUCT Turn the knob bolt on the oxygen cylinder holder counterclockwise to loosen it. Slowly insert the oxygen cylinder into the oxygen cylinder holder and then turn the knob bolt clockwise to tighten it and firmly secure the oxygen cylinder.
  • Page 23 DAILY MAINTENANCE, LONG-TERM STORAGE, AND PRODUCT DISPOSAL DAILY MAIN TEN ANCE, LON G-TERM STOR AGE, AND PR ODUCT D ISPOSAL Daily maintenance When removing stains from parts Perform steps 1 to 5 below. Wipe off stains with a cloth soaked in a neutral detergent diluted with water and wrung out well. Wipe off any residual detergent with a cloth soaked in water and wrung out well.
  • Page 24 SPECIFICATIONS AND PRODUCT SYMBOL DEFINITIONS SPECIFIC AT ION S AND PR ODUCT SYM BOL DEF INITION S Specifications Product name Oxygen cylinder holder Model No. IC-A84 Dimensions 29.9 x 16.5 x 51.9 cm Product weight 3.5 kg Materials Made of steel, zinc and aluminum coating Outside diameter of usable oxygen cylinder 1000 to 1500 L (14 cm to 15.5 cm) Safe working load...
  • Page 25: After-Sale Service

    AFTER SALE SERVICE AFTER SALE SER VIC E 1. When requesting repairs For requests for repair, contact Paramount Bed (see Contact Information below) or your distributor. Information required when you request repair  Product name, model number, and product ID label number (for the affixed location, see “Part names and checking parts”)
  • Page 26 MEMO...
  • Page 27 MEMO...
  • Page 28 Made by: PARAMOUNT BED Co., Ltd. 2023-03...

Table of Contents