Parts Supplied For Installation - Fisher & Paykel OR30S Installation Manual

Anti-tip bracket (1) Small screws and
washers (2)
3 TOOLS NEEDED FOR INSTALLATION (NOT SUPPLIED WITH THE APPLIANCE)
IMPORTANT!
THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER.
Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage.
●
Consult a qualified installer, service agent, or the gas supplier.
The use of suitable protective clothing/gloves is recommended when handling or installing this appliance.
●
T-handle
Screwdriver Screwdriver Screwdriver Screwdriver Screwdriver 2 - Wrench 2 - Wrench 2 - Wrench 2 - Wrench 2 - Wrench wrench
Screwdriver 2 – Wrench
2

PARTS SUPPLIED FOR INSTALLATION

Bolt (1) Threaded nuts (2) Wood screws (8)
T-handle T-handle T-handle T-handle Tape
wrench wrench wrench wrench Pencil Pencil Pencil Pencil Pencil measure measure
T-handle Pencil Tape measure
wrench
Screws and plastic Pressure regulator (1)
sleeve anchors (8)
Screwdriver Screwdriver Screwdriver
Suitable protective Suitable protective Suitable protective
Tape Tape Tape Tape
gloves gloves gloves
measure measure measure
Suitable
protective gloves
1/2" (12.7mm) NPT
connector and
gasket (1)
*Can be used in US only, for Canada it is mandatory to
connect the range by using cordset with plug supplied.
T-handle T-handle T-handle
2 - Wrench 2 - Wrench 2 - Wrench wrench wrench wrench Pencil Pencil Pencil
Adjustable Adjustable Adjustable
Hammer Hammer Hammer Adjustable Adjustable Adjustable
wrench wrench wrench
pliers pliers pliers
Hammer Adjustable Adjustable
wrench pliers
Ground lead* Cupped washer*
(3 wire permanent (4 wire permanent
connection) connection)
Tape Tape Tape
measure measure measure
Drill Drill Drill
Drill
5