Metrohm 930 Compact IC Flex SeS Manual - Short Instructions page 35

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
930 Compact IC Flex SeS (2.930.1400)
CO adsorption cartridge CW (6.2837.100)
￭
2
The adsorber cartridge is in the accessory kit: Vario/Flex SeS
(6.5000.020).
Preparing the CO
Prepare the CO adsorption cartridge CW for use as follows:
2
1 Remove the protective cap from the tip of the CO
tridge CW.
2 Attach the dust filter to the tip of the CO
3 Remove the label from the lid of the CO
This uncovers the small opening in the lid of the CO
tridge CW, through which air is aspirated.
The CO adsorption cartridge CW is now ready for installation.
2
NOTICE
The new CO adsorption cartridge CW (6.2837.100) works without
2
attached H O adsorption cartridge.
2
adsorber cartridge CW
2
5 Installation
adsorption car-
2
adsorption cartridge CW.
2
adsorption cartridge CW.
2
adsorption car-
2
￭￭￭￭￭￭￭￭
27