Lincoln Electric FineLine 300HD Operator's Manual page 100

FineLine 300HD Plasma System
On the Power Supply
The Power Supply status light will display Power Supply-specific error codes only.
Error codes are displayed starting with one green blink followed by a series of red
blinks. Pauses indicate the start of another digit. Count the number of red blinks to
identify each digit in the error code and then refer to the table below to identify the
error. Errors will be displayed at least three times or until the error is cleared. Refer
to Section 7.2.2 to lookup specific error codes.
Example:
Green
(Start)
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
8 1
Red Red
Off
(Pause) (Pause)
Page 100 of 132
System Events Log
The most recent events appear
at the bottom of the list on
Status Screen > Logs. Events
are also indicated by a time
stamp. Use the scroll bar to
move up and down the list.
Refer to Section 7.2.2 to lookup
specific event codes.
= 815 (Coolant level is low)
5
Red
Off
BK8053-000107 Rev D