Siemens KNX RDG400KN Basic Documentation page 78

Parameter settings
in ACS
Notes
Plant diagram in
ACS
78 / 86
Siemens
Smart Infrastructure
The ACS tool supports parameter settings even during normal operation.
To change a control parameter, select Applications, then Plant operation.
· Make sure you have logged on with sufficient access right
· Only control parameter can be changed, no application!
The ACS tool offers plant diagrams for easy monitoring and operation of the
thermostat. To start this application, select Standard diagram.
RDG400KN,RDG405KN Basic documentation CE1P3192en
2019-04-12