–
"8-bay backplane + 8-bay backplane" on page 36
–
"8-bay backplane + AnyBay backplane" on page 37
–
Two processors installed
–
Four processors installed
–
"AnyBay backplane + AnyBay backplane" on page 41
–
Two processors installed
–
Four processors installed
Important:
1. Make sure all the signal cables go through the cable guides.
Figure 23. Cable guide locations
2. Connect the direct NVMe signal cables to the NVMe connectors on the processor and memory
expansion tray.
Figure 24. Connecting NVMe cables to the processor and memory expansion tray
.
Chapter 2
Server components
31