Advertisement
SECTION 1 - JLG SMART SYSTEM ™ ANALYZER KIT INSTRUCTIONS (1600258 CONTROLLER).
ADDITIONAL FIELD SERVICE SETTINGS
JLG STRONGLY RECOMMENDS THAT THE FOLLOWING SETTINGS NOT BE CHANGED. CHANGING THESE SETTINGS MAY ADVERSELY
AFFECT THE PERFORMANCE OF YOUR MACHINE
Table 1-2. Additional Field Service Settings - (Machines Equipped with 1600258 controller).
NOTE: 1. The steer-only-creep maximum varies, depending on the current machine model. It is not always 35%
NOTE: 2. This adjustment is only for those machines equipped with power LIFT DOWN. To identify machines equipped with
power LIFT DOWN, refer to the Effectivity Page for serial number identification.
NOTE: 3. LIFT DOWN speed is non-adjustable on machines equipped with gravity LIFT DOWN. To Identify machines equipped
with gravity LIFT DOWN, refer to the Effectivity Page for serial number identification.
3120442
PERSONALITY
MAX -CURRENT
ELEVATION-CUTBACK
POSITRAC-TIMEOUT
HIGHDRIVE-CURRENT-LIMIT
HIGHDRIVE-TIME-LIMIT
– JLG Sizzor –
MIN
MAX
0 A
200 A
40%
0%
255 SEC
0 SEC
200 A
50 A
25 SEC
0 SEC
1-5
Advertisement
