Advertisement
SECTION 2 - JLG SMART SYSTEM ™ ANALYZER KIT INSTRUCTIONS (CONTROLLER 1600286).
Analyzer Menu Structure for 1600286 Controller
In the following structure descriptions, an intended item is selected by pressing ENTER; pressing ESC steps back to the next
outer level. The LEFT/RIGHT arrow keys move between items in the same level. The UP/DOWN arrow keys alter a value if
allowed
Table 2-5. Analyzer Menu Structure (Machines equipped with 1600286 controller)
TOP LEVEL MENU
HELP;PRESS ENTER
DIAGNOSTICS
3120442
ITEM TO BE VIEWED
SUB LEVEL MENU
OR CHANGED
HELP
LOGGED HELP
ASPC IN...
PLATFORM
JOYSTICK
STEER
POSI-TRAC
HIGH DRIVE
DRIVE
LIFT
DECK
GROUND
UP
DOWN
OUT
IN
SYSTEMS
BATTERY
TEMPERATURE
PUMP VOLT
PUMP AMP
ELEVATION
– JLG Sizzor –
DESCRIPTION DISPLAY
Displays current help/fault message
Log of most recent help/fault messages: LEFT/RIGHT view
Displays current controller mode.
NEUTRAL/DRIVE/FORWARD/LIFT/etc.
Displays joystick demand 0%...100% Preceded by "+" for
forward/up/out, or by "-" for reverse/down/in.
Displays steer status. (NONE/LEFT/RIGHT/etc)
Displays posi-trac switch status (OPEN/CLOSED)
Displays high drive switch status (OPEN/CLOSED)
Displays drive mode select switch status (OPEN/CLOSED)
Displays lift mode select switch status (OPEN/CLOSED)
Displays deck mode select switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO
Displays ground lift up switch status (OPEN/CLOSED)
Displays ground lift down switch status (OPEN/CLOSED)
Displays ground deck out switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO
Displays ground deck in switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO
Displays measured battery voltage
NOTE: Only accurate when line contactor closed
Displays measured heatsink temperature
Displays calculated pump motor voltage
Displays calculated pump motor current
Displays elevation cutout switch status (OPEN/CLOSED)
Closed with platform fully lowered
2-13
Advertisement
