Advertisement
SECTION 2 - JLG SMART SYSTEM ™ ANALYZER KIT INSTRUCTIONS (CONTROLLER 1600286).
JLG SMART System™Analyzer Instructions for Controller Number1600286
NOTE: The part number of the controller is located on the controller decal.
• To connect the hand held analyzer for ALL 1600286 controllers:
1. Connect the four pin end of the cable supplied with the analyzer, to the top connection of the motor controller and con-
nect the remaining end of the cable to the analyzer.
NOTE: The cable has a four pin connector at each end of the cable; the cable cannot be connected backwards.
2. Power up the SMART System™ by turning the lower key to the platform position and pulling both emergency stop but-
tons on.
• Using the analyzer with ALL 1600286 controllers:
With the machine power on and the analyzer connected properly, the analyzer will display the following:
HELP:
PRESS ENTER
At this point, using the RIGHT and LEFT arrow keys, you can move between the top level menu items. To select a displayed
menu item, press ENTER. To cancel a selected menu item, press ESC; then you will be able to scroll using the right and left
arrow keys to select a different menu item.
The top level menus are as follows:
HELP
DIAGNOSTICS
RUN SYSTEMS TEST (NOTE:Ensure machine is fully lowered before running systems test)
ACCESS LEVEL
PERSONALITIES
MACHINE SETUP
CALIBRATIONS (level 1 only)
If you press ENTER, at the HELP:PRESS ENTER display, and a fault is present during power up, the analyzer display will
scroll the fault across the screen. If there was no fault detected during power up, the display will read: HELP: EVERYTHING
OK
If ENTER is pressed again, the display moves to the following display:
LOGGED HELP
1: STARTUP (2/1)
At this point, the analyzer will display the current fault, if any are present. You may scroll through the fault logs to view what
the last ten faults were. Use the right and left arrow keys to scroll through the fault logs. To return to the beginning, press
ESC two times.
When a top level menu is selected, a new set of menu items may be offered; for example:
PLATFORM
GROUND
SYSTEMS
DATA LOG
VERSIONS
DRIVE
2-2
– JLG Sizzor –
3120442
Advertisement
