HPE ANW AP-654 Product End-Of-Life Disassembly Instructions page 3

1.Put the unit onto the fixture and remove the two screws on the bracket at the position shown
in the figure with torque force equipment. (Type：PH2)
2.Put the unit onto the fixture reversely and remove the four screws from the die cast with
torque force equipment. (Type: TT10)
MF877-00
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Page 3