Download Print this page
Canvas Dashley 085-1557-8 Assembly Instructions Manual
Canvas Dashley 085-1557-8 Assembly Instructions Manual

Canvas Dashley 085-1557-8 Assembly Instructions Manual

Outdoor fire table

Advertisement

Quick Links

Dashley Outdoor
Fire Table
MODEL N0. 085-1557-8
L-FT1047PST-F
ASSEMBLY INSTRUCTIONS
Toll-free 1 888 670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.

Advertisement

loading

Summary of Contents for Canvas Dashley 085-1557-8

  • Page 1 Dashley Outdoor Fire Table MODEL N0. 085-1557-8 L-FT1047PST-F ASSEMBLY INSTRUCTIONS Toll-free 1 888 670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
  • Page 2: Carbon Monoxide Hazard

    Outdoor Fire Table Assembly Instructions WARNING: For Outdoor Use Only. DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odour continues, keep away from the appliance and immediately call your gas supplier or fire department.
  • Page 3 MODEL NO. 085-1557-8 L-FT1047PST-F General information Specifications Important safety information and precautions Expanded view Parts list Assembly Location Setup Gas connection Operation Leak test Lighting Storage and maintenance Troubleshooting Limited warranty IMPORTANT Please take time to read these instructions thoroughly and follow each step carefully for safe and easy operation.
  • Page 4 Product name Outdoor Fire Table Model No. 085-1557-8 Rated Heat Output 35,000 BTU/hr Fuel Propane-LP Gas Supply 20 lb (9 kg) LP-Gas cylinder Manifold Pressure 11" W.C. 1.9 mm Orifice Size (diameter) Gas Supply Pressure Max 250 PSI When the appliance is for connection to a fixed piping system, the installation must conform with local codes, or in the absence of local codes with the National Fuel Gas Code, ANSI Z223.1/NFPA54;...
  • Page 5 MODEL NO. 085-1557-8 L-FT1047PST-F Product size:∅38.9"XH19",When in use, keep cylinder at least 30 in / 76.2 cm side clearance from fire pit table, DO NOT trip over the gas pipe between fire pit and cylinder when passing through, to prevent cylinder from tipping over.
  • Page 7 MODEL NO. 085-1557-8 L-FT1047PST-F Description FT1047ELP01 Fire pit component FT1047ELP02 Small base FT1 047ELP03 Large circle base FT1047ELP04 Roundbase connector FT1047ELP05 Tank rack FT1047ELP06 Lava rock (13 lb/6 kg) LPHSS60X1 H Description Image M6x30 Bolt BM06030C M6 Washer VD06C M4x8 Self tapping screw ZS4008C Wrench W10D...
  • Page 8 Step 1 Connect small base ( ) to large circle base ( ), use 4 pcs bolt ( ) and washer ( to secure as shown above. Step 2 Turn fire pit component ( ) upside down and put it on a flat surface, then connect assembled ( ) and ( ) to fire pit component (...
  • Page 9 MODEL NO. 085-1557-8 L-FT1047PST-F Step 3 Set the assembled fire pit component ( ) upright, put the lid ( ) on the fire pit. Place the tank rack ( ) on the left hand side of the control panel on ( ) as shown above.
  • Page 10 Your gas appliance must be installed on a flat, stable surface, away from any combustible materials or construction. Your gas appliance comes assembled, ready for a gas connection. 1-Remove the appliance from container box and place it on any level, outdoor, non-combustible surface.
  • Page 11 MODEL NO. 085-1557-8 L-FT1047PST-F LEAK TEST !!!WARNING!!! Do not use an open flame to check for leaks. Do not smoke during testing. Do not test indoors. A leak test must be performed whenever the gas cylinder is replaced. 1. Make sure the control knob is in the “OFF” position. 2.
  • Page 12: Corrective Measures

    Incorrect gas supply C heck gas supply pressure pressure blocked orifice C heck and clean orifice opening C logged dirty burner C lean burner ports ports If you want to replace the parts listed, please contact CANVAS Customer Service Centre 1-888-670-6684.
  • Page 13 MODEL NO. 085-1557-8 L-FT1047PST-F Subject to the conditions set out below, this product is warranted to the original purchaser to be free from defects in workmanship and materials for one (1) year from the date of pur- chase. Satisfactory proof of the purchase date must be furnished at the time of notification of the defect for any claim under the warranty to be enforceable.

This manual is also suitable for:

L-ft1047pst-f