Table of Contents
Advertisement
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
camcorder (p. 78).
Recording
Refer also to "Memory card" (p. 89).
Pressing START/STOP or FIXED SHOT/
PHOTO does not record images.
The playback screen is displayed. Press MODE
to turn on the
(p. 25, 26).
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete
unnecessary images (p. 49).
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder. Delete unnecessary images (p. 49).
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with:
[Smth Slw REC]
[Golf Shot]
[
Fader]
The camcorder cannot shoot photos while it
is in the movie recording mode, depending on
the setting of [
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
US
0
(Movie) or
(Photo) lamp
Rec Format].
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The flash does not work.
You cannot record with the built-in flash
while:
the
(Movie) lamp is on
[Conversion Lens] is set to other than [Off]
Even if auto flash or Auto redeye reduction is
selected, you cannot use the flash with:
NightShot
manually-set [IRIS] or [Shutter Speed] (when
either one of them has been assigned to the
MANUAL dial)
[Spot Meter/Fcs]
[Spot Meter]
[Manual] in [Exposure]
[Night Scene], [Sunrise&Sunset], [Fireworks],
[Landscape], [Spotlight], [Beach] or [Snow]
in [Scene Selection]
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter
(p. 98), for example when recording a fast
moving object, etc.
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
Advertisement
Chapters
Table of Contents
