Sony HXR-NX30N Operating Manual page 71

On ( )
The zoom (p. 29) moves to the top of the T
(telephoto) side automatically and allows
recording subjects at close range down to
about 32 cm (12 5/8 in.).
Notes
When recording a distant subject, focusing may

be difficult and can take some time.
Adjust the focus manually ([Focus], p. 67) when

it is hard to focus automatically.
SteadyShot
See page 36.
SteadyShot
You can compensate for camera shake.
Set [ SteadyShot] to [Off] (
using a tripod (sold separately), then the
image becomes natural.
 On
The SteadyShot function is used.
Off ( )
The SteadyShot function is not used.
FIXED SHOT/PHOTO
You can assign a function to the FIXED
SHOT/PHOTO button (p. 25). This setting
is available when the
 FIXED SHOT
This function further reduces camera shake.
PHOTO
This function is used when shooting photos.
) when
(Movie) lamp is lit.
Digital Zoom
You can select the maximum zoom level.
Note that the image quality decreases when
you use the digital zoom.
The zooming zone appears when you set
[120×].
 Off
Digital zoom cannot be used.
120×
Up to 120× zoom is performed digitally.
Conversion Lens
Set this menu item when you want to use
a conversion lens (sold separately) that is
compatible with your camcorder.
When using a conversion lens (sold
separately), use this function to record
using the optimum compensation for
camera shake and focus for the lens.
 Off
Select this when you do not use a conversion
lens.
Wide Conversion ( )
Select this when you use a wide end
conversion lens.
Tele Conversion ( )
Select this when you use a tele-conversion
lens.
Notes
If you select [Wide Conversion], the SteadyShot

function will be canceled.
US
1