(Gps) - Sony HXR-NX30N Operating Manual

Notes
When the INPUT1/INPUT2 (LINE/MIC/

MIC+48V) switch  or  is set to LINE, the
input level is fixed to +4dBu. Even if you reset
the ATT switch, the input level does not change.
3
Set the channel to be recorded.
You can select the channel to be
recorded with the REC CH SELECT
(INPUT1) switch .
The position
of the REC
CH SELECT
(INPUT1)
switch
CH1·CH2
CH1
Notes
To use a stereo microphone with 2 XLR (3PIN)

plugs, connect Lch to the INPUT1 jack  and
Rch to the INPUT2 jack , and set the REC
CH SELECT (INPUT1) switch  to CH1.
US

Audio recorded on CH1,
CH2
INPUT1
INPUT1
INPUT2
Recording
information on your
location
The camcorder records information on
the location when movies or photos are
recorded (the default setting).
GPS triangulating status
CH1
CH2
CH1
CH2
Triangulating
Triangulating meters

(GPS)

Searching for the
satellites
Number of dots
changes
Unable to
triangulate
Unable to record
location information
Images will be registered using
the location information that was
previously obtained.