Table of Contents
Advertisement
Notes
Even if the time code advances in the [Rec
Run] mode, the time code may not be recorded
sequentially in the following cases.
When the recording format is changed.
When the recording media is removed.
TC Make
Preset
Records the newly set time code on the
recording media.
Regenerate
Reads the last time code of the previous
recording from the recording media and
records the new time code consecutively
from the last time code during the backspace
editing.
The time code runs in [Rec Run] mode
regardless of the setting of [TC Run].
UB Time Rec
Off
Does not save the actual time in the user bit
code.
On
Saves the actual time in the user bit code.
Notes
The last 2 digits are fixed to 00 when it is set
to [On].
US
0
Edit/Copy
(Items for editing)
See "Using menus" (p. 58) on the operation.
Delete
See page 49.
Protect
Protect movies and photos to avoid deleting
them by mistake.
will be displayed on the protected
images.
Multiple Images
You can select one or more images and
"protect" them.
Select the type of image you want to
protect.
Add check marks to the desired
images.
You can select multiple images.
Select the image with so that the mark
disappears and you can remove the protection.
Select
Set All In Event
You can protect all images in the selected
date at one time.
Select the date you want to protect using
/
.
You cannot select multiple dates.
Select
.
.
Advertisement
Chapters
Table of Contents
