Sony HXR-NX30N Operating Manual page 84

HDMI TC Output
You can transfer time code, user bit data to
the device connected with the HDMI cable.
 Off
Does not output time code, user bit code.
On
Outputs time code, user bit code.
USB Connect
Select this item when [USB Select] does not
appear on the LCD screen by connecting
the camcorder to a computer with the USB
cable.
Beep
 Off
Cancels the melody.
On
A melody sounds when you start/stop
recording, or operate the touch panel.
LCD Brightness
You can adjust the brightness of the LCD
screen.
 Normal
Normal setting (normal brightness).
Bright
Select this when the LCD screen is not bright
enough.
This adjustment does not affect the recorded
images in any way.
Display Setting
You can set the duration of displaying the
icons or indicators on the LCD screen.
US

 Auto
Displays for about 3 seconds. The rec & zoom
buttons on the LCD screen are displayed.
On
Always displays. The rec & zoom buttons on
the LCD screen are not displayed.
GPS Information
The camcorder can display location
information.
Satellite icons
Triangulating gauge
Information for the location that
was previously obtained.
How to check the triangulating
information
Color of the satellites/ Status
triangulating gauge
No signal, but orbit
/ (black)
information for the
satellite is available.
33 % of the satellite orbit
/ (gray)
information has been
obtained.
66 % of the satellite orbit
/ (brown)
information has been
obtained.
99 % of the satellite orbit
/ (ocher)
information has been
obtained.
Triangulating is completed
/ (green)
and the satellite is
currently being used.
Update