Star Micronics TSP200 Series Programmer's Manual page 39

Commands to Set the Page Format
Set page length in lines
FUNCTION
CODE <ESC> "C"
1B
HEX
Sets the page length using the current line spacing, where n is
REMARKS
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Default page length is 42 lines.
Set page length in inches
FUNCTION
<ESC> "C" <0>
CODE
1B
HEX
Sets the page length to n
REMARKS
The current line becomes the top of the page.
Resets the bottom margin.
Set bottom margin
FUNCTION
CODE <ESC> "N"
1B
HEX
Sets the bottom margin to n lines at the current line spacing, where
REMARKS
n is between 0 and 127.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
Cancel bottom margin
FUNCTION
CODE <ESC> "O"
1B
HEX
Cancels the bottom margin.
REMARKS
n
43 n
n
43 00 n
24 mm, where n is between 1 and 22.
n
4E n
4F
– 35 –