Star Micronics TSP200 Series Programmer's Manual page 37

Upperlining
FUNCTION
CODE
<ESC> "_"
1B
HEX
When the value of n is 1, overlines the subsequent data including
REMARKS
a character spacing set by <ESC><SP> n.
The part to be skipped by the horizontal tab setting and the block
graphic characters are not upperlined.
Resets the upperline mode when the value of n is 0.
The value of n can be set to 0(00H) or "0"(30H), or 1(01H) or
"1"(31H).
Select highlight printing
FUNCTION
CODE <ESC> "4"
1B
HEX
Prints the subsequent data including a character spacing set by
REMARKS
<ESC><SP> n reversed.
The part to be skipped by the horizontal tab setting is not reversed.
Cancel highlight printing
FUNCTION
CODE
<ESC> "5"
1B
HEX
Cancels highlight printing.
REMARKS
Inverted printing
FUNCTION
CODE <SI>
0F
HEX
Causes subsequent characters to be inverted.
REMARKS
Cancel inverted printing
FUNCTION
CODE <DC2>
12
HEX
Cancels inverted printing.
REMARKS
n
5F n
34
35
– 33 –