Garbin 4 PRO Instructions For The Installation, Use And Maintenance page 50

CORE PROBE TEMPERATURE KEY
Pressing the core probe key:
- the yellow LED turns on and stays on.
- the time display changes from three digits to two di-
gits (00).
- Set adjustable from 0 °C to 100 °C
- Default 0 °C
- the time key is excluded.
The value setting procedure is the same.
When the oven is started the time display shows the
temperature detected at the core of the product.
When the set point of the core probe is reached, the
oven behaves as when the timer reaches 0 in the timed
mode.
MULTI-SPEED SELECTION KEY
00
To select the speed of the motor press the multi-speed
key, the time display shows the speed steps and the spe-
ed icon turns on.
not pressed, after 10 seconds it returns to showing the
time parameter.
When the speed values are changed, a check of the ma-
ximum temperature is also performed. If the limit is ex-
ceeded the system automatically sets the temperature
at the maximum threshold and the temperature display
The speed of the motor can be changed only if the oven
888
is ON or on STOP , during the cooking the speed cannot
be changed.
By setting the speed to 1 the oven will start at the maxi-
mum speed until it reaches the set temperature.
The speed steps are:
1 = 2100/1800 rpm
maximum temperature 220 °C
2 = MAX 2800 rpm
maximum temperature 270 °C
+ and - are