Table of Contents
Advertisement
Adding a Paper Type/Changing the Print Setting
Follow the steps below to add a paper type or change the print setting of the printer driver on
each client computer.
❏ Item to be prepared by the administrator
• The BSF file for the existing printer driver
Follow the steps below to create the BSF file
➀
Set the new paper type in the print setting for the existing printer driver, and register it to
the [Favorite Setting]. Make sure the print setting for the existing paper type has also
been registered.
➁
Place the print setting for the new paper at the top of the [Favorite Setting] list.
➂
Export the BSF file.
❏ What to do on the client computer after distribution
• Import the BSF file in the printer driver.
Be sure to register also the print setting for the existing paper type to the [Favorite Setting]
list. Otherwise, it is deleted when importing the BSF file.
Replacing the Printer
When replacing a printer due to such causes as malfunction, follow the steps below.
USB interface model
In a system in which the USB interface model printers are connected to multiple client
computers, you do not need to set the client computer when replacing the printer if you have set
the same USB serial number to the printer.
You cannot connect more than one printer that has the same USB serial number to one client
computer. It is possible only for a different client computer. The USB serial number can be
changed with the TMUSB Identifier Utility (TMUSBID.exe).
Normally, when a new USB interface model printer is connected, a new printer driver
(printer queue) and a new USB port are created on the client computer. It is necessary to
change the port when printing with the new printer from the application on the client com-
puter.
Chapter 5 Maintenance of the TM-C610
5
117
Advertisement
Table of Contents
