Table of Contents
Advertisement
When "Module" is set to an odd number and the resolution is changed by changing [Print
Resolution], the printed barcode size may be changed. The barcode size can be checked
by using the [Size Display] button.
• Bar Height:
• Adjust Bar Width:
• HRI Character Position: Select the position of the HRI characters. Select [Do Not Print] when
The printing position is limited for some types.
• HRI Font:
• Element Ratio:
• Character Spacing:
2
Click [Add].
The selected barcode font is saved and the font name is added to the font list.
Up to 30 barcode fonts can be registered.
The barcode font setting can be overwritten by clicking [Save] after selecting the font
name from the font list and changing the setting.
The barcode font setting can be deleted by clicking [Delete] after selecting the font
name from the font list.
Execute a test print according to the setting by clicking [Print] after inputting the text in
the box.
Specifying the barcode data
Specify the barcode data by referring to the following descriptions.
About the composite symbol:
The composite component type is selected automatically depending on the digit number of
the data.
Composite Component Type
CC-A
CC-B
About the HRI character:
Sets the element height with dots. Specified dots indicate the actual
print size.
Narrows the element width when printing. Make sure to select it
only when the barcode is not clear enough to be read.
not desired.
Select the HRI character font size.
Sets the thick element width by the ratio to the thin element width.
Sets the character spacing (interval) by the ratio to the thin element
width.
Encodable Digit Number
1 ~ 56 digits
1 ~ 338 digits
Chapter 4 Handling
4
75
Advertisement
Table of Contents
