Connecting The Usb/Ethernet Cable - Epson TM-C610 Technical Reference Manual

Connecting the USB/Ethernet cable

For the USB interface model, connect the USB cable, for the Ethernet interface model, connect the
Ethernet cable to the printer.
 When Ethernet cables are installed outdoors, make sure devices without proper
CAUTION
 Never attempt to connect a standard telephone line cable to the 10/100BASE-T
1
Put your finger on the groove in the upper part of the rear cover, and pull
it backward to remove it.
2
For the USB interface model, connect the USB cable to the connector, as
shown below. For the Ethernet interface model, connect the Ethernet
cable to the connector until it clicks.
USB interface model
38
surge protection are cushioned by being connected through devices that do have
surge protection. Otherwise, the devices can be damaged by lightning.
LAN connector.
Groove
USB cable
Ethernet interface model
Ethernet cable