Table of Contents
Advertisement
Setting the thresholds
Setting the thresholds
3s
10 - en
Bring the transmitter as close as possible to the
required receiver.
Press the programming button for 3 seconds. The
transmitter performs a search and the LED ring
continuously changes colour. The transmitter then
switches to receiver selection and selects the re-
ceiver with the best connection quality.
▻ The receiver confirms.
If you do not receive confirmation from the re-
quired receiver, you can press the
toggle between the available receivers until the re-
quired receiver confirms.
▻ The transmitter displays the current as-
signment status of the receiver via the
LED ring.
Assignment status
The receiver is not yet part of the
Lights up yel-
installation or is in the as-de-
low:
livered condition.
Lights up
The receiver is not assigned to
blue:
the selected channel.
Lights up
The receiver is assigned to the
green:
selected channel.
/
button to
Advertisement
Table of Contents
