Indicators - Standard Horizon HX460S Owner's Manual

3.2 INDICATORS

Figure 2
Indicators
Channel Display
The operating channel is shown on the LCD in both the transmission and
reception modes. When the optional SU-1 Barometric Pressure Sensor Unit
is installed, the LCD may be configured to indicate the current Barometric
Pressure.
A Indicator
Signifies ship-to-ship channels in USA or Canadian mode (whose counter-
part in the International mode is a public correspondence (marine operator)
channel).
USA/CAN/INTL Indicator
Denotes the "band" of operation for the particular channel. "USA" indicates
the USA band; "CAN" indicates the Canadian band; and "INTL" indicates
the International band. Refer to the Owner's Manual Supplement for a list of
channels.
H/M/L Indicator
" " indicates high power; " " indicates medium power; and " " is for low
power. "Blank" in this location indicates a reception-only channel.
PRI Indicator
Priority Scan is activated.
SCN Indicator
Scan is activated.
TX Indicator
Appears during transmission.
HX460S Page 7