Cloning - Standard Horizon HX460S Owner's Manual

4.18 CLONING

The HX460S includes a convenient "Clone" feature, which allows the memory
and configuration data from one transceiver to be transferred to another
HX460S. Here is the procedure for Cloning one radio's data to another:
1. Turn both radios off.
2. Connect the (optional)
the two transceivers.
3. Hold down the PRESET key and then turn on the transceiver. Do this for
both transceivers (the order of switching the radios on does not matter);
"c L n " will appear on the display on both transceivers.
4. On the Destination transceiver, press the MEM key ("c r " will appear on
the LCD).
5. Press the 16/9 key on the Source transceiver; "c S " will appear on the
Source radio, and the data will now be transferred.
6. If there is a problem during the cloning process, " cE " will displayed. Check
your cable connections and battery voltage, and try again.
7. If the data transfer is successful, the Destination transceiver will return
to normal operation; Turn both transceivers off and disconnect the Clone
cable. You can then turn the transceivers back on, and begin normal
operation.
Page 20
CT-32 Clone Cable between the MIC/SP jacks of
HX460S