6. Attach a Handrail (80) to the Right Upright (86)
with two 5/16" x 2 1/4" Screws (7) and two 5/16"
Star Washers (12) in the location shown; start
both Screws, and then tighten them. Do not
pinch the Upright Wire (88), and make sure
that the wire is on the indicated side of the
Right Upright.
Attach the other Handrail (80) to the Left
Upright (85) in the same way. Note: There are
no wires on the left side.
Then, remove and discard the indicated
screws (E).
7. Set the console assembly (F) face down on a
soft surface to avoid scratching the console
assembly. Attach the Right and Left Trays
(99, 98) with eight #8 x 1/2" Screws (5); start all
eight Screws, and then tighten them. Do not
overtighten the Screws.
Then, remove and save the four 1/4" x 1/2"
Screws (24).
6
7
12
E
80
85
7
5
99
24
F
11
7
12
E
80
88
5
5
98
24
86
5
Need help?
Do you have a question about the PFTL59722.0 and is the answer not in the manual?
Questions and answers