Lubricating The Steering Head Bearing; Removing Front Fender; Installing Front Fender - KTM 150 XC-W 2023 Owner's Manual

12.13

Lubricating the steering head bearing

12.14

Removing front fender

12.15

Installing front fender

–
Remove the motorcycle from the lift stand. (
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
H02387-01
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
V00340-10
–
Remove screws
V00341-10
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
V00341-11
SERVICE WORK ON THE CHASSIS 12
( p. 66)
( p. 67)
1
.
2
. Take off front fender.
M6 10 Nm (7.4 lbf ft)
p. 63)
p. 118)
1
.
71