Table of Contents
Advertisement
16 COOLING SYSTEM
128
–
Push protection cap
sensor.
S04306-10
–
Unplug connector
–
Remove coolant temperature sensor
until the coolant escapes without bubbles.
–
Mount and tighten the coolant temperature sensor
ring.
Guideline
Screw, cylinder head
temperature sensor
S04307-10
–
Plug in connector
–
Position protection cap
–
Pour coolant in up to level
Guideline
10 mm (0.39 in)
Coolant (
400243-10
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
S04305-10
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
Finishing work
–
Check the coolant level. (
3
upward over the coolant temperature
4
.
5
with O-ring and wait
M10x1.25
4
.
3
.
A
above the radiator fins.
p. 163)
2
.
p. 124)
5
with O-
12 Nm (8.9 lbf ft)
Advertisement
Table of Contents
